Inovonics David IV Скачать руководство пользователя страница 26

Страница: 26 / 67

— 22 —

STEREO ENHANCEMENT

The DAVID IV has a twin-action stereo enhancer. Navigate to

the

Processing / Stereo Enhance

menu:

The

Stereo Enhance

menu has check boxes to turn the enhance-

ment effects on and off, plus two sliders that graphically depict

the action of this feature.

Stereo Width

The

Stereo Width

slider increases the perceived width of the

soundstage, which is that area between the listener’s left and

right loudspeakers. Increasing

Stereo Width

makes the stereo

‘wider,’ exaggerating the stereo effect even to the point of its

appearing to extend outside the confines of the normal sound-

stage; that is, to the left of the left speaker and to the right of

the right one.

As the control is advanced, the

graphic display will highlight an area

outside the normal soundstage as

shown here. The shaded area, as well

as the number shown below it, is somewhat arbitrary, serving

only to illustrate what’s intended and to give a number for set-

up reference.

Stereo Width

is active only on stereophonic program material, it

does not imply any sort of stereo synthesis from a monaural

source.

Solo Width

The

Solo Width

slider, on the other hand, acts only on center-

channel (monaural) material.

Nearly all contemporary music is recorded in very sterile

multitrack sessions. Generally, each instrument has its own

microphone (or microphones) and is recorded as an individual

monaural track. The recording engineer, under the expert

guidance of the Producer, uses a ‘pan pot’ to place each track

somewhere between full-left and full-right to create a stereo-

phonic soundstage (or soundfield). Vocal solos are almost al-

ways panned dead-center, just like the talent mic in the radio

studio.
As

Solo Width

processing is intro-

duced and increased, the centered

vocalist (and on-air DJ) will appear to

‘spread’ across the soundstage. This

is illustrated on the graphic display

as shown here. As with the

Stereo Width

control, the shaded ar-

ea and number are arbitrary and relative.

Содержание David IV




































































Результаты поиска

Содержание David IV

Отзывы:

Похожие инструкции для David IV

Бренды по названию

Популярные бренды

Inovonics David IV, Инструкция по установке и эксплуатации

Результаты поиска

Содержание David IV

Отзывы:

Похожие инструкции для David IV

Бренды по названию

Популярные бренды