Inovonics David IV Скачать руководство пользователя страница 9

Страница: 9 / 67

— 5 —

Section I

INTRODUCTION

DAVID IV PRODUCT DESCRIPTION

The 719 is fourth in Inovonics’ series of “DAVID” FM Broadcast

Processor/Stereo Generators. DAVID, referring to David vs. Go-

liath, is an apt name for this series of airchain audio processors

that consistently deliver giant-killing performance that belies

the modest cost of ownership and simplicity of operation.
DAVIDs I through III made exclusive use of analog circuitry, but

the DAVID IV moves into the digital realm as a DSP-based

product. As such it more approximates an audio processing

engine

that is easily upgraded in the field as new processing al-

gorithms are suggested, developed and released.

NOTE:

With the release of Rev. 2 firmware and software, two

new features have been included in the DAVID IV: Diversity De-

lay for the HD Radio™ system, and r.m.s. control of the multi-

plex signal per ITU standards.

Features

Leading features of the Inovonics DAVID IV include:

Intelligent gain-riding AGC to correct wandering levels

from the console or playout system, and to maintain

long-term consistency between diverse program sources

without upsetting the tonal balance.

5 bands of dynamic range compression and equalization

to help create a ‘sonic signature’ tailored to the station’s

personality. The DAVID IV

’

s low-bass augmentation pro-

vision gives independent control over both the sustained

and the transient program bass elements.

Stereo-enhancement options that address the apparent

width of the stereo image as well as solo (center channel)

fullness.

‘Look-ahead’ final limiting that includes Inovonics’ pro-

prietary PIPP™ limiter technology to assure optimum

modulation efficiency.

Flexible control over the r.m.s. power of the composite,

multiplex output, conforming to the European ITU-R

BS.412.9 Standard.

Analog and digital inputs that accept virtually any pro-

gram audio feed.

Dual composite/MPX outputs for main and backup trans-

mitters, plus simultaneous analog and digital line out-

Содержание David IV




































































Результаты поиска

Содержание David IV

Отзывы:

Похожие инструкции для David IV

Бренды по названию

Популярные бренды

Inovonics David IV, Инструкция по установке и эксплуатации

Результаты поиска

Содержание David IV

Отзывы:

Похожие инструкции для David IV

Бренды по названию

Популярные бренды