Inova TableBed, Инструкция по сборке, Страница: 54 / 55

Tech support is readily available if needed
Email: support@inovabed.com
Phone: 866.528.2804
TableBed | ASSEMBLY MANUAL
PLEASE NOTE: Your Bed may look different
than what is shown in the pictures and
videos throughout this manual
THE TABLEBED IS DIFFICULT TO
BRING DOWN (OPEN)
IMPORTANT!: Never Force Bed Open
First, confirm bolts underneath FootRest are
tight and in the desired location (See: How It
Works - Adjustment).
Test.
If it still will not open, access behind the
TableBed (see above)
With a flashlight, look closely for any object
(may be small) that may be obstructing the
mechanism from working properly.
Also check that all connections are still in tact
(see assembly manual for proper installation).
Prior to moving Bed back in place,
Test.
THE TABLEBED IS DIFFICULT
TO RAISE UP (CLOSE)
IMPORTANT!: Never Force TableBed Closed
First, confirm bolts underneath FootRest are
tight and in the desired location
(See: How It Works - Adjustment).
Test.
Remove any pillows. Test.
Confirm mattress and bedding has not
exceeded maximum thickness (see original
order for maximum thickness allowed).
Test.
If the TableBed still will not raise up, lower
the Headboard (see instructions under
Access Behind Bed) and with a flashlight,
check for an object (may be small) that may
be obstructing the mechanism from working
properly. Remove object. Also confirm all
connections are still in tact with mechanism
(see assembly manual for proper installation).
Set HeadBoard back in place.
Test.
If the TableBed still will not raise up,
confirm bolts underneath FootRest are
tight and in the desired location
(See: How It Works - Adjustment).
Test.
TROUBLESHOOTING
(CONT.)