Inova TableBed, Инструкция по сборке, Страница: 34 / 55

Tech support is readily available if needed
Email: support@inovabed.com
Phone: 866.528.2804
A.
Under the Bed Platform, towards the Cabinet,
line up the holes in the hinge at the end of
the Tabletop with the corresponding holes in
the Bed Platform.
B. Bolt the H-019 Machine Screws upwards
through the holes in the hinge, through the
Bed Panels, and into the T-Nuts that are
already set in the Bed Panels on the other
side.
C. TIP: It is best to start a H-019 Machine Screw
at each end of the hinge. Once the hinge is
aligned this way, you can finish inserting all
of the machine screws and tightening them.
STEP 15:
Attach the Table Hinge to the Bed Platform
Tabletop
H-019
Flipper Center