Inova TableBed, Инструкция по сборке, Страница: 40 / 55

Tech support is readily available if needed
Email: support@inovabed.com
Phone: 866.528.2804
A.
Carefully raise the Bed Platform to its
upright position. It will feel heavy because
the spring mechanism is not engaged yet. The
Table will come up as the bed is raised.
B. As the bed is raised, the two bolts shown will
slide forward toward the Table Leg. Grab one
of those bolts with a pair of pliers and slide
the spring mechanism (inside the footrest)
towards the Table Leg. Don’t pull it too tight;
just move it until it stops naturally. Tighten
both bolts firmly with a 9/16” wrench. The
next time the Bed is lowered, the springs will
balance its weight.
A
B
Hex Bolt
Use this version of Step 20 if your TableBed has a Table Extension
STEP 20:
Raise the Bed and Tighten the Spring Anchor Bolts