Inova TableBed, Инструкция по сборке, Страница: 49 / 55

Tech support is readily available if needed
Email: support@inovabed.com
Phone: 866.528.2804
TableBed | ASSEMBLY MANUAL
PLEASE NOTE: Your Bed may look different
than what is shown in the pictures and
videos throughout this manual
HOW IT WORKS
(CONT.)
1.
Place TableBed in Up Position
(so there is no tension when you are working)
2. Loosen the two 3/8” Bolts under the FootRest
3. To INCREASE tension: slide the bolts toward the
TableLeg (away from TableBed) and tighten.
4. To DECREASE tension: slide the bolts away from
the TableLeg (toward the TableBed) and tighten.
HOW TO
ADJUST TENSION:
STEPS FOR ADJUSTMENT:
To adjust the tension of the TableBed:
Locate the two Bolts underneath the FootRest.
The ideal adjustment is to have as much tension as
possible, so the bed is easy to raise and lower, but not
so much that it “floats” up after it is lowered.