Inova TableBed, Инструкция по сборке, Страница: 28 / 55

Tech support is readily available if needed
Email: support@inovabed.com
Phone: 866.528.2804
STEP 11:
Attach Right and Left Bed Panels & Attach Side Rails to Bed Panels
A.
Carefully place the finished side of Bed
Panels on the carpet or other padded surface.
Make sure the area is clear of any hardware
or debris that can cause damage.
B. Attach the Right and Left Bed Panels to each
other using the H-085 Mending Plates and
H-087 Pan Head Screws, making sure that the
top edge of the panels are well aligned when
installing the H-085 Mending Plates.
C. Screw the H-011 minifix pins into the smaller
holes at the outer sides of the Bed Panels. Tap
wood dowels into the larger holes. Be careful
to tap gently; the dowels may dimple the face
of the panels if hit too hard!
D. Place the Side Rails on top of the fittings as
shown. Tighten all of the minifix cams. The
Side Rails must be positioned so that their
ends with pre-installed threaded inserts are
oriented, as shown.
Use this version of Step 11 if your TableBed has a plain front Bed Panel
A
Left Bed Panel
Right Bed Panel
B
H-087
H-085
C
H-003
H-011
Left Bed Panel
Right Bed Panel
D
Threaded Inserts
Side Rail, Left
Threaded Inserts
Side Rail, Right