Inova Solutions ontime Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 46

Inova Solutions ontime Скачать руководство пользователя страница 8

OnTime Clock

Installation and User Guide

Firmware Version 2

All claims based on information publicly available at time of printing. All other product or service names mentioned

in this document may be trademarks of the companies with which they are associated.

© 2017 Inova Solutions | All rights reserved | page 3

2. Safety Instructions

Read and understand all instructions before installing or operating an OnTime Clock.
This product is safe when installed and operated as described in this user guide.



To prevent injury, damage to the unit, or other harm, read this manual in its
entirety before installing or operating the clock.



Observe normal safety precautions and use appropriate safety equipment (safety
glasses, gloves, ladders, etc.) when installing this product.



Never install wiring during a lightning storm.



Never install data jacks or electrical wiring in wet locations unless the equipment
is specifically designed for that purpose.



Be sure that mounting hardware is suitable for the mounting surface and
sufficient to support the weight of the clock.



Observe all local codes when installing the product.



This product is not a toy! Please keep it out of the reach of children.



Operation of this product in a manner inconsistent with the instructions in this
manual may result in personal injury and damage to the product and will void
the warranty.



Do not use harsh cleaners or aerosol cleaners. Use a damp cloth for cleaning.



Do not place this product on an unstable cart, stand, or table. The product may
fall, causing injury or damage.



This product is not approved for damp or wet locations; it is certified for dry,
indoor installation

«
...
6
7
8
9
10
...
»

Содержание ontime















































Отзывы:

Нет отзывов