Inova Solutions ontime Скачать руководство пользователя страница 4

Страница: 4 / 46

All claims based on information publicly available at time of printing. All other product or service names mentioned

in this document may be trademarks of the companies with which they are associated.

6.7.

Setting Different DHCP Option Numbers for a Clock ............................ 24

6.8.

Verifying the DHCP Configuration Settings on a Clock ........................ 24

6.9.

DHCP Configuration Example for Microsoft Server .............................. 25

Manual Configuration Using Telnet .......................................................... 26

7.1.

Establishing a Telnet Connection to the Clock ..................................... 26

7.2.

Configuring an IP Address .................................................................... 27

7.2.1.

DHCP ..................................................................................................... 27

7.2.2.

Assigned Static IPv4 Address ................................................................ 27

7.3.

Specifying a Primary or Secondary Time Server .................................. 28

7.4.

Setting the Time Zone .......................................................................... 29

7.5.

Configuring Daylight Saving Time ........................................................ 30

Troubleshooting ......................................................................................... 31

Warranty and Maintenance ........................................................................ 33

9.1.

Warranty ............................................................................................... 33

9.2.

Repair and Returns .............................................................................. 33

10.

Glossary of Terms .................................................................................. 34

Appendix A: Clock Configuration ................................................................... 35

Appendix B: Configuring DHCP Options for Microsoft Servers .................. 39

Appendix C: Clock Management System Support ......................................... 41

Figures

Figure 1: PoE Cabling Plan ............................................................................................ 6

Figure 2: Analog Clock Mounting Template .................................................................... 7

Figure 3: Analog Clock Double Mount Assembly ............................................................. 8

Figure 4: Mounting Template for 4-Digit Clocks .............................................................. 9

Figure 5: Mounting Template for 6-Digit Clocks ............................................................ 10

Figure 6: Digital Clock Pendant Mounting ..................................................................... 11

Figure 7: Digital Clock Cantilever Mounting .................................................................. 12

Figure 8: Template for 4-Digit Clocks ........................................................................... 14

Figure 9: Template for 6-Digit Clocks ........................................................................... 14

Figure 10: Data Cable Installation ................................................................................ 15

Figure 11: Clock/Recessed Mount Assembly ............................................................... 15

Figure 12: Power Up Sequence ................................................................................... 16

Содержание ontime















































Результаты поиска

Содержание ontime

Отзывы:

Inova Solutions ontime, Инструкция по установке и эксплуатации, Страница: 4 / 46

Результаты поиска

Содержание ontime

Отзывы: