Inova Solutions ontime Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 46

Inova Solutions ontime Скачать руководство пользователя страница 18

OnTime Clock

Installation and User Guide

Firmware Version 2

All claims based on information publicly available at time of printing. All other product or service names mentioned

in this document may be trademarks of the companies with which they are associated.

© 2017 Inova Solutions | All rights reserved | page 13

5.

Attach cover plates (items 4 and 5, Figure 7) with screws (item 6) using

5/32”

allen wrench (provided).

6.

One at a time, insert a data cable into the RJ45 jack locted in the rear of each
clock. Any excess cable can be stowed inside the well in the back of the clock.

7.

Position the keyhole slots located on the rear of the clock on the hanger hooks
located on the mount.

8.

Pull the clock slightly downwards until the unit is seated securely.

9.

Install the 2 retention fasteners (item 7, Figure 7) to secure the clocks to the
mount.

4.9. Recessed Mounting the Digital Clock

The recessed mounting feature of the OnTime Clock provides an attractive, streamlined
mounting that blends with all room decors. This simple system hides the clock body,
while still giving full viewing access to the time face with no visible wiring.
The following is the recommended procedure for recessed mounting.

1.

Ensure that the location that is chosen for mounting is pre-wired with a data
network feed.

2.

Cut an appropriately-sized opening into the wall. Refer to Table 2 for
appropriate dimensions for the opening.

Model

Horizontal Dimension

Vertical Dimension

4-Digit

12

3

/

8

” or

31.4 cm

6 ½”

or 16.5 cm

6-Digit

17

7

/

8

” or

45.4 cm

Table 2: Dimensions for Mounting Digital Clock

Clearance within the wall should be at least 2 ½”

(6.4 cm) deep to allow for the

clock body.

When cutting the opening please refer to the template provided in Figure 8 and Figure 9

.

This will help ensure that the opening is square as well as the proper size and in
the correct location.

«
...
16
17
18
19
20
...
»

Содержание ontime















































Отзывы:

Нет отзывов