Inova Solutions ontime Скачать руководство пользователя страница 44

Страница: 44 / 46

OnTime Clock

Installation and User Guide

Firmware Version 2

All claims based on information publicly available at time of printing. All other product or service names mentioned

in this document may be trademarks of the companies with which they are associated.

Appendix B: Configuring DHCP Options for Microsoft
Servers

This section details how to configure options on a Microsoft DHCP server, such as the
one that is bundled with Windows 2003 Server. It is for reference only and may not
represent the specific options that you may encounter.

Launch the DHCP Management Console.

Select the DHCP server to configure.

Choose the Action “Set Predefined Options…”

Choose “Add…” a new option.

Set the Data type to ‘String’.

Use the option code that matches your clock configuration. The default option
code is 230.

Select either the Server Options or Scope Options and choose “Configure
Options…”.

Select the Option in the list and select the checkbox to enable it.

Содержание ontime















































Результаты поиска

Содержание ontime

Отзывы:

Inova Solutions ontime, Инструкция по установке и эксплуатации, Страница: 44 / 46

Результаты поиска

Содержание ontime

Отзывы: