Inova Solutions ontime Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 46

Inova Solutions ontime Скачать руководство пользователя страница 30

OnTime Clock

Installation and User Guide

Firmware Version 2

All claims based on information publicly available at time of printing. All other product or service names mentioned

in this document may be trademarks of the companies with which they are associated.

© 2017 Inova Solutions | All rights reserved | page 25



If option 230 (or an alternate option code specified on the clock) is not configured
on the DHCP server, the clock will receive an IP Address in the usual fashion but
the settings for Time Server, Time Zone, DST, etc. will come from the

clock’s

internal configuration (i.e., the settings set via command line in a telnet session
or, if none, then the default settings from the factory).

6.9. DHCP Configuration Example for Microsoft Server

Appendix B: Configuring DHCP Options for Microsoft Servers

contains an example of how

to configure options on a Microsoft DHCP server, such as the one that is bundled with
Windows 2003 Server. It is for reference only. It is assumed that skilled IT personnel
are the only people authorized to edit DHCP server settings.

«
...
28
29
30
31
32
...
»

Содержание ontime















































Отзывы:

Нет отзывов