Innovo® CMS 50F PLUS User Manual
22
8 Troubleshooting
Trouble
Possible Reason
Solution
No SpO
2
and
Pulse Rate is
registered
1.
The finger is not
properly positioned.
2. The patient’s
blood perfusion is
too low to be
detected.
1. Make sure that
the finger is
inserted properly
into the device.
2. Make sure
nothing is
restricting your
blood flow (See
Chapter 6.3).
The
SpO
2
and
Pulse Rate values
displayed on the
screen are
erractic or lower
than a spot check
monitor
1. The finger is not
placed deep enough
into the probe.
2. The finger is
moving.
1. Place the finger
properly and try
again.
2. Try to keep the
patient stationary
The device cannot
be turned on or
the display turns
off suddenly
1.
The battery is
drained.
2.
The device has
malfunctioned.
1.
Please recharge
the battery.
2.
Please contact
the local service
center.
After a full
charge, the
battery is
discharged after
only a few hours
of usage
1. The battery is not
fully charged.
2. The battery has
malfunctioned
1. Please recharged
the battery.
2. Please contact
the local service
center.
