INNOVASON SY40, Руководство пользователя

Страница: 46 / 244

3-8
S
ENSOFT
8.1
User Guide - © InnovaSON - January 2004
Read paragraph 2.A.7 of this manual if you need help in achieving the required settings.
Output processing is only available on cards equipped with DSP, such as the XO-8D and
DO-8X. MO-8D and DO-8A cards, just as line-level outputs, have no access to these
functions. Currently, internal busses such as Subgroups do not carry processing; they will
in a future version of Sensoft.
3.A.4 Creating and using a Subgroup
Remove the MIC1 input from the Master busses by holding
down its [
SELECT ] button and pressing the [ SELECT ]
button of one of the Master busses (the LEFT and RIGH
[
SELECT ] button illumination will turn off to indicate that the
routing has been removed).
From now on, the signal present on input MIC1 of the console will no longer be distributed by the PA
system. We are going to route this signal to a Subgroup which, in turn, will be injected onto the Master
busses.
During the console configuration, faders 51 - 56 were set up as Groups, and their labels were
automatically named Gr51 to Gr56 . Now we must assign to them, not a physical output, given that we
will use them as Subgroups, but a processing resource so that the DSP creates the bus necessary for
the functioning of a Subgroup. In the PATCH OUT window, the line at the bottom of the grid allows
DSP resources to be patched to internal busses, thus not requiring processing to be directly patched
on physical outputs. As shown in the following illustration, it is enough to “patch” DSP resources to the
Groups to make them Subgroups.