INNOVASON SY40, Руководство пользователя

Страница: 174 / 244

S
ENSOFT
O
FF
L
INE
7-5
User Guide - © InnovaSON - January 2004
7.B.3 The PATCH OUT GRID window
As with the PATCH IN window, creating a patch point in the PATCH OUT window is relatively easy,
simply position the cursor in the right place (left click of the mouse or keyboard cursor keys) and
validate the point under the cursor (right click of the mouse or keyboard [SPACE BAR]).
The following sequence shows the procedure used to patch spread outputs (in this case an Aux)
which, here also, requires two selections :
You must use the mouse to change zones, that is, to pass from the Bus Channel zone to that of the
spread X
BUS
. This allows you to make a direct zone change, without modifying the selection made in
the previous zone.
Once you are in the chosen zone, it is then possible to use the keyboard cursor keys to point to lines
and columns, and the [SPACE BAR] to create a patch point.
How do I get there
With the mouse: select Patch Output in the GRID menu
With the keyboard: press the [F12] key
2 - Place the cursor in the zone
corresponding to the LR spread of
the Aux. For this, just place the
mouse pointer on either one of the
Aux’s LR columns, and use the left-
click to pull the cursor into this zone.
1 - With the aid of the left-click on
the mouse, place the cursor in the
Aux channel column, in the zone
where the Aux faders are located.
The name of the channel appears
above the faders,
IE2 in this
example.
3 - Once in the patch zone, it’s
possible to use the keyboard cursor
keys and space bar, or simply
continue patching with the aid of the
mouse. Note that the channel
currently being patched is always
indicated above the faders (
IE 2 )