INNOVASON SY40, Руководство пользователя

Страница: 52 / 244

3-14
S
ENSOFT
8.1
User Guide - © InnovaSON - January 2004
Let’s have a look at the current state of the main mix window
From now on, the VCA will control the “CD” channel. Allocate the VCA to other channels and note how
fast and easy this is to do. A VCA can also, thanks to its own [
MUTE ] button, be used to create banks
of mutes.
3.A.7 Spreading a Master
There are sometimes cases where it is practical to have access on the control surface to individual
faders controlling the busses of a section Master, as it is equally sometimes practical to have only a
single fader to control all the busses of a section Master. With the Sy80 there is no compromise. By
spreading a Master (or an Aux, Group, etc.) you can have single finger-tip control of all the busses in
the section and then, by simply pressing a [
SELECT ] button, all the busses in the section are available
for individual control of their Left, Right, Center and Mono channel balance. Up until now, our Master
consisted of two faders, one allocated to the Left bus and the other to the Right bus. We’re going to
abandon this Master and create a Left, Right and Center version which can be spread.
The vertical green line
indicates the currently
selected channel, in this
case channel 2 (“CD”) The vertical beige line indicates the
channel on which the EQ, Dyn, etc.
controls are currently active, in this
case the “CD R” channel The yellow point indicates that
this VCA is controlling the
selected channel, in other words,
the “CD” channel
The yellow points indicate that the
selected channel (“CD”) is routed
to the Masters