INNOVASON SY40, Руководство пользователя

Страница: 48 / 244

3-10
S
ENSOFT
8.1
User Guide - © InnovaSON - January 2004
Having created 6 Subgroups, it only remains to route the MIC1 input to one of them, and to route the
same Subgroup to the Master busses.
If there is now an audio signal present on the MIC1 input, and if a PA system is connected to the
“LEFT” and “RIGH” outputs, opening the input fader while the Subgroup and Master faders are at 0dB,
will feed that input signal to the PA system. Verify that the Subgroup fader really does control the
MIC1 input.
Before going any further, repeat the steps you have just seen in this example by using line
inputs and outputs (with the Sub-D/XLR cables supplied with the console). Try sending
several audio sources to a Subgroup, while keeping an eye on the PATCH window,
especially the resource indicators.
Route the MIC1 input to Subgroup 51
The yellow point indicates that the
selected input is routed to this bus
Route Subgroup 51 to one of the Masters
Confirmation that the selected bus is routed to
the Masters