INNOVASON SY40, Руководство пользователя

Страница: 235 / 244

R
ACKS AND
M
ODULES
T
ECHNICAL
C
HARACTERISTICS
9-29
User Guide - © InnovaSON - May 2004
Patch OUT, programmed as
below, assigns the 8 matrices
to
ES channels 1 to 8.
The ES8Out breakout
box is ‘patched’ in 1
and converts
ES
channels 1 to 8 to
analogue signals that
are available on its XLR
outputs as soon as the
CAT5 cable is
connected.
The rules for installing modules in the Mix Box are the same for DO-8XES as for XO-8D2 or DO-8X
modules and depend also of course on the audio set up required.
Example 1 : Sy40 console fitted with 16 ES channels.
This Sy40, equipped with 2 DO-8XES modules, has 16 processed outputs, 16 mic/line inputs and 8
line inputs. The DO-8XES modules in slots E and F, configured respectively to 0 and 1, use the
ES
channels 1 to 16.
This first example shows only the 8 ES channels coming from the module positioned in slot E. A
second equivalent network may be set up using, independently, the module in F to transport 8 other
ES channels (8 other mix buses) to another destination (another ES8Out box or equivalent). These
two networks are then independent.
A network of 16 channels is set-up when the F ‘TO’ connector is linked with the ‘FROM’ of the E
module. This ‘daisy chain’ adds the F module’s channels 9 to 16 to the E module’s
ES frame. The
resulting network audio coming from the E DO-8XES module transports 16 channels (mix buses).
Each output box can be configured to output 2 to 8 of these 16
ES channels (depends of the model).
Therefore, the output boxes can be ‘daisy-chained’ to simplify the wiring or extend the distribution.
Second ES network
DO-8XES Slot F
DO-8XES Slot E
CAT5
8 outputs
8 outputs
Attention : the ES8out
configuration mode is
different from the DO8-
XES module.