Innova Innova Filomuro Incasso SLWI, Инструкция по установке и эксплуатации, Страница: 30 / 36

30
INSTALLATION
To select digital input
–
select the menu item "di" by pressing
The default value appears
–
select "CP" for clean contact
–
select "CO" to cooling open
–
select "CC" to cooling close
By default digital input is set to CP.
By selecting one of the other inputs (CO,CC) the seasonal-
ity is locked. It is not possible to modify it through the key
of the control.
For return to the default settings, set the digital input to
"CP".
Enable the radiant zone
–
select the menu item "rZ" by pressing
The default value appears
–
select "no" to disable the radiant zone
–
select "YS" to enable the radiant zone
This function can only be used for wall controls (EWG649 -
EWW49) combined with the EF1027 board.
By default the radiant zone are disabled.
Reset modbus
–
select the menu item "rb" by pressing
The default value appears
–
select "no" to keep the current settings
–
select "YS" to reset the settings
Factory reset
–
select the menu item "Fr" by pressing
The default value appears
–
select "YS" to reset the settings
–
select "no" to keep the current settings
Probe T regulation offset (room temperature probe)
–
select the menu item "ot" by pressing
The default value appears
–
the setting range is from -9 to 12
Use this adjustment carefully.
This adjustment must be carried out only after having
found actual deviations from the room temperature using
a reliable tool.
Adjust the value within a range of -9 °C to +12 °C, in steps
of 0,1 °C.
After 30 seconds from the last action the control goes out
and the settings is memorized.
Scale
–
select the menu item "Sc" by pressing
The default value appears
–
To change the temperature unit of measure select °C or °F
3.5 Warnings
Long period shut-down
For seasonal shutdowns or for long periods:
– disable the device – set the main system switch to Off
The antifreeze function is not on.
Error signals
Room temperature probe failure located inside the
thermostat
Failure or connection of a double remote room
probe on one of the connected device