Innova Innova Filomuro Incasso SLWI, Инструкция по установке и эксплуатации, Страница: 29 / 36

29
INSTALLATION
To access the menu
–
with the display off, hold down for 10 seconds
The device turns on and the temperature appears
–
keep pressed until the indication "Ad" appears
To navigate in the menu
–
use the icons
The menu items change
To select a menu item and to confirm the changes made
–
press the icon
Pressing and confirming the change takes you to the next item
To exit the settings menu
–
press the icon for 10 seconds
–
or wait 30 seconds the automatic shutdown
The display turns off
After 30 seconds from the last action the control goes out
and the settings is memorized.
Menu items
Ad
Modbus address
uu
Enable/Disable Wifi
Ub
Adjust buzzer volume
br
Adjust the brightness
di Digital input
rZ
Enable/Disable radiant zone
rb
Reset modbus
Fr
Factory reset
ot
Offset probe T
oh
Reserved
Sc Scale
rE
Reserved
Set the modbus address
–
select the menu item "Ad" by pressing
The default value appears
–
the setting range is from 01 (min) to 99 (max)
–
increase or decrease the value with the icons
The displayed value change
Enable or disable Wifi
–
select the menu item "uu" by pressing
The default value appears
–
select "YS" to enable wifi
–
select "rs" to reset the settings
–
select "no" to disable wifi
This function can only be used for controls with integrated
wifi.
By default wifi is enabled.
Adjusting buzzer volume
–
select the menu item "uu" by pressing
The default value appears
–
the volume setting range is from 00 (min) to 03 (max)
–
increase or decrease the value with the icons
The displayed value change
The volume changes after confirm the modification.
Adjust the brightness of the display
–
select the menu item "br" by pressing
The default value appears
–
the brightness setting range is from 00 to 01
–
increase or decrease the value with the icons
The displayed value change
The brightness changes after confirm the modification.
You can also reduce the brightness of the display through
the keys of the control. With the display off, hold down
for about 20 seconds, the message "01" will appear.
Press to decrease the brightness to "00". Wait 30 sec-
onds for the correct setting to be checked.