Innova Innova Filomuro Incasso SLWI Скачать руководство пользователя страница 3

3

 

GENERAL

   

 GENERAL

1.1    General  warnings

After unpacking, make sure that all the components are 
present. If not, contact your vendor who sold the device 
to you. 

Only qualified installer companies are authorised to in-
stall the device. After having completed installation, the 
installer will issue a declaration of conformity to the plant 
manager, as required by the applicable standards and the 
guidelines provided by contractor's instruction manual 
supplied with the device.

These device have been designed for room heating and/

or air conditioning and must be used as intended and 
compatibility with their performance levels. Any contrac-
tual and extra-contractual liability of constructor for harm 
caused to person, animals or property by installation er-
rors, improper adjustments, maintenance or use is exclud-
ed.

If water leaks out of the device, set the main switch to "Off" 
and close the water taps. Contact our Technical Customer 
Service as soon as possible or professionally qualified staff 
and do not personally attempt fix the problem.

If the device is to remain out of service for a prolonged 
period, make sure you carry out the following operation:

–  set the main system switch to "Off"

–  close the water taps

–  if there is a danger of frost, make sure that you have added 

anti-freeze liquid into the circuits, or drain out the system 
otherwise

A temperature that is too low or too high is harmful to 
health and is an unnecessary waste of energy. Avoid direct 
contact with the air flow over an extended period.

Avoid keeping the installation premises closed for a long 
time except in the presence of a heat recovery ventilation 
system.

This instruction manual forms an integral part of the de-

vice and therefore must be carefully preserved and must 
ALWAYS travel with it, even if you transfer the device to an-
other owner or relocate it to other premises. If the manual 
gets damaged or lost, download a copy from the website.

All repair or maintenance interventions must be per-
formed by the technical service department or by pro-
fessionally qualified personnel as foreseen in this booklet. 
Do not modify or intervene on the appliance as this could 
create dangerous situations and the manufacturer will not 
be responsible for any damage caused.

Avoid contact: danger of burns.

1.2    Basic rules of security

Please keep in mind that the use of products powered by 
electricity and water call for operators to comply with certain 
essential safety rules:

It is forbidden to children and unassisted disabled persons 
to use the device. The unit can be used by children over 
the age of 8, and by people with reduced physical, sensory 
or mental capabilities, or with no experience or necessary 
knowledge, as long as they are monitored or after they 
have received instructions on the safe use of the unit and 
have understood the dangers involved. Children must not 
play with the appliance. The cleaning and maintenance 
that must be performed by the user should not be carried 
out by children without supervision.

It is forbidden to touch the device with wet or damp body 
parts.

It is forbidden to clean the device before having discon-
nected it from the mains by setting the main switch of the 
system to "off".

It is forbidden to modify the safety or adjustment devic-
es or adjust without authorization and indications of the 
manufacturer.

It is forbidden to pull, unplug or twist the device's electric 
cables, even if it is disconnected from the mains.

It is forbidden to introduce objects and substances 
through the air inlet and outlet grilles.

It is forbidden to open the access doors of the device's 
internal parts without first having set main switch of the 
system to" off".

It is forbidden to dispose of, or leave in the reach of chil-
dren, the packaging materials which could become a 
source of danger.

Содержание Innova Filomuro Incasso SLWI





































Отзывы: