Innova Filomuro SLW 400, Инструкция по установке и эксплуатации, Страница: 4 / 44

4
GENERAL
GENERAL
1�1 General warnings
After unpacking, make sure that all the components are
present. If not, contact your vendor who sold the device
to you.
Only qualified installer companies are authorised to in-
stall the device. After having completed installation, the
installer will issue a declaration of conformity to the plant
manager, as required by the applicable standards and the
guidelines provided by contractor's instruction manual
supplied with the device.
These device have been designed for room heating and/
or air conditioning and must be used as intended and
compatibility with their performance levels. Any contrac-
tual and extra-contractual liability of constructor for harm
caused to person, animals or property by installation er-
rors, improper adjustments, maintenance or use is exclud-
ed.
If water leaks out of the device, set the main switch to "Off"
and close the water taps. Contact our Technical Customer
Service as soon as possible or professionally qualified staff
and do not personally attempt fix the problem.
If the device is to remain out of service for a prolonged
period, make sure you carry out the following operation:
– set the main system switch to "Off"
– close the water taps
– if there is a danger of frost, make sure that you have added
anti-freeze liquid into the circuits, or drain out the system
otherwise
A temperature that is too low or too high is harmful to
health and is an unnecessary waste of energy. Avoid direct
contact with the air flow over an extended period.
Avoid keeping the installation premises closed for a long
time except in the presence of a heat recovery ventilation
system.
This instruction manual forms an integral part of the de-
vice and therefore must be carefully preserved and must
ALWAYS travel with it, even if you transfer the device to an-
other owner or relocate it to other premises. If the manual
gets damaged or lost, download a copy from the website.
All repair or maintenance interventions must be per-
formed by the technical service department or by pro-
fessionally qualified personnel as foreseen in this booklet.
Do not modify or intervene on the appliance as this could
create dangerous situations and the manufacturer will not
be responsible for any damage caused.
Avoid contact: danger of burns.
1�2 Basic rules of security
Please keep in mind that the use of products powered by
electricity and water call for operators to comply with certain
essential safety rules:
It is forbidden to children and unassisted disabled persons
to use the device. The unit can be used by children over
the age of 8, and by people with reduced physical, sensory
or mental capabilities, or with no experience or necessary
knowledge, as long as they are monitored or after they
have received instructions on the safe use of the unit and
have understood the dangers involved. Children must not
play with the appliance. The cleaning and maintenance
that must be performed by the user should not be carried
out by children without supervision.
It is forbidden to touch the device with wet or damp body
parts.
It is forbidden to clean the device before having discon-
nected it from the mains by setting the main switch of the
system to "off".
It is forbidden to modify the safety or adjustment devic-
es or adjust without authorization and indications of the
manufacturer.
It is forbidden to pull, unplug or twist the device's electric
cables, even if it is disconnected from the mains.
It is forbidden to introduce objects and substances
through the air inlet and outlet grilles.
It is forbidden to open the access doors of the device's
internal parts without first having set main switch of the
system to" off".
It is forbidden to dispose of, or leave in the reach of chil-
dren, the packaging materials which could become a
source of danger.
It is forbidden to climb with your feet on the device and/
or place any kind of object on top of it.
The external components of the device can reach temper-
atures of more than 70 °C.