Innova 3100j, Руководство пользователя, Страница: 8 / 108

About the Diagnostic Tool
BATTERY REPLACEMENT
6 3100j
On some Asian and European vehicles the DLC is located
behind the “ashtray” (the ashtray must be removed to access it)
or on the far left corner of the dash. If the DLC cannot be
located, consult the vehicle’s service manual for the location.
BATTERY REPLACEMENT
Replace batteries when the battery symbol is visible on display
and/or the 3 LEDS are all lit and no other data is visible on screen.
1. Locate the battery cover on the back of the diagnostic tool.
2. Using a Phillips head screwdriver, remove the screw from the
battery cover.
3. Slide the battery cover off (use your fingers).
4. Replace batteries with three AA-size batteries (for longer life, use
Alkaline-type batteries).
5. Reinstall the battery cover and screw on the back of the diagnostic
tool.
Adjustments After Battery Installation
The first time the unit is turned on, you must select the desired display
language (English, French or Spanish) and unit of measurement (USA
or Metric) as follows:
1. Press the POWER/LINK button
to turn the diagnostic tool “ON.”
„ The Select Language screen
displays.
2. Use the UP and DOWN
buttons, as necessary, to highlight the
desired display language.
3. When the desired display language is
selected, press the
ENTER button
to confirm your selection.
„
The Select Unit screen displays.
4. Use the UP and DOWN
buttons, as necessary, to highlight the
desired unit of measurement.
5. When the desired unit of measurement is selected, press the
ENTER button to confirm your selection.
After the initial language and unit of measurement selections
are performed, these, as well as other settings, can be
changed as desired. Proceed to “ADJUSTMENTS AND
SETTINGS” on page 85 for further instructions.