Innova 3100j, Руководство пользователя, Страница: 73 / 108

Additional Functions
SYSTEM TEST MENU
3100j 71
OBD Monitor Test
The OBD Monitor Test function retrieves and displays test results for
emission-related powertrain components and systems that are not
continuously monitored. The tests available are determined by the
vehicle manufacturer.
The diagnostic tool does not perform the OBD monitor test, but
retrieves results from the most recently performed tests from
the on-board computer’s memory. You may retrieve OBD
monitor test results for only one test at any given time.
1. From the System Test menu, use the
UP and DOWN buttons, as
necessary, to highlight OBD Monitor
Test , then press the ENTER button.
2. A “One moment please. . .” message
displays while the request is sent to the
vehicle’s on-board computer.
„
The Select Test screen displays.
The screen shows all tests
applicable to the vehicle under test.
Refer to the vehicle’s service repair
manual for information related to
non-continuous tests.
If OBD monitor test data is not
presently stored in the vehicle’s
computer, an advisory message
shows on the diagnostic tool’s
display. Press the
M button to
return to the Main Menu.
If OBD monitor tests are not
supported by the vehicle under test,
an advisory message shows on the
diagnostic tool's display. Press the
M button to return to the Main
Menu.
3. Use the UP and DOWN
buttons, as necessary, to highlight the
desired test, then press the
ENTER
button.
4. When test results have been retrieved,
data for the selected test will show on
the diagnostic tool’s display. The
display shows the following information:
„ Test ID number
„ Module ID number
„ Component ID number
„ Min or Max test limit