Innova 3100j, Руководство пользователя, Страница: 57 / 108

Using the Diagnostic Tool
VIEWING SRS DTCs
3100j 55
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 8 for a description of
LCD display elements.
„
A visible icon indicates that the diagnostic tool is being
powered through the vehicle’s DLC connector.
„
A visible icon indicates that the
diagnostic tool is linked to
(communicating with) the vehicle’s
computer.
„ The upper left corner of the display
shows the Diagnostic Trouble Code
(DTC), the number of the code
currently being displayed and the
total number of codes retrieved, and
the type of code.
„ The related code definition is shown
in the lower section of the LCD
display.
If the definition for the currently
displayed code is not available, an
advisory message shows on the
diagnostic tool’s LCD display.
I/M MONITOR STATUS icons are not displayed when viewing SRS
DTCs.
In the case of long code definitions, a small arrow is shown in
the upper/lower right-hand corner of the code display area to
indicate the presence of additional information. Use the
UP
and DOWN buttons, as necessary, to view the
additional information.
„ The diagnostic tool will display a
code only if codes are present in the
vehicle’s computer memory. If no
codes are present, a "No SRS DTC’s
are presently stored in the vehicle’s
computer" is displayed. Press the
SYSTEM MENU button to return
to the System Menu.
3. If more than one code was retrieved press the DTC button, as
necessary, to display additional codes one at a time.
„ Whenever the Scroll function is used to view additional codes,
the Scan Tool’s communication link with the vehicle’s computer
disconnects. To re-establish communication, press the
POWER/LINK button again.
4. When the last retrieved DTC has been displayed and the DTC button is
pressed, the Scan Tool returns to the “Priority” code.