manualshive.com logo in svg

Innova 3100j, Руководство пользователя, Страница: 41 / 108

Поделиться
Скачать
Innova 3100j Скачать руководство пользователя страница 41

 

 

 

Using the Diagnostic Tool 

 

 

VIEWING FREEZE FRAME DATA 

 

 

 

3100j 39 

 

If more than one malfunction is present that causes more 
than one DTC to be set, only the code with the highest 
priority will contain Freeze Frame data. The code 
designated “

01

” on the diagnostic tool display is referred to 

as the PRIORITY code, and Freeze Frame data always 
refers to this code. The priority code is also the one that 
has commanded the MIL on. 

Retrieved information can be uploaded to a Personal 
Computer (PC) with the use of optional software (see 
instructions included with the software for more information). 

14.

 

When the last retrieved DTC has been displayed and the 

DTC

 button is 

pressed, the display returns to the first DTC retrieved. 

15.

 

Determine engine system(s) condition by viewing the diagnostic 
tool’s LCD display for any retrieved Diagnostic Trouble Codes, code 
definitions, Freeze Frame data and interpreting the green, yellow 
and red LEDs. 

„

 

If DTC’s were retrieved and you are going to perform the repairs 
yourself, proceed by consulting the Vehicle’s Service Repair 
Manual for testing instructions, testing procedures, and flow 
charts related to retrieved code(s). 

„

 

If you plan to take the vehicle to a professional to have it 
serviced, complete the PRELIMINARY VEHICLE DIAGNOSTIC 
WORKSHEET on page 28 and take it together with the retrieved 
codes, freeze frame data and LED information to aid in the 
troubleshooting procedure. 

„

 

To prolong battery life, the diagnostic tool automatically shuts 
“Off” approximately three minutes after it is disconnected from 
the vehicle. The DTCs retrieved, Monitor Status and Freeze 
Frame data (if any) will remain in the diagnostic tool’s memory, 
and may be viewed at any time by turning the unit “On”. If the 
diagnostic tool’s batteries are removed, or if the diagnostic tool 
is re-linked to a vehicle to retrieve codes/data, any prior 
codes/data in its memory are automatically cleared. 

VIEWING FREEZE FRAME DATA 

In OBD2 systems, when an emissions-related engine malfunction occurs 
that causes a DTC to set, a record or snapshot of engine conditions at the 
time that the malfunction occurred is also saved in the vehicle’s computer 
memory. The record saved is called Freeze Frame data. 

1.

 

While linked to the vehicle, press and release the 

FF

 button. 

„

 

The Freeze Frame screen displays. 

„

 

Saved engine conditions include but 
are not limited to: engine speed, 
open or closed loop operation, fuel 
system commands, coolant tem-
perature, calculated load value, fuel 
pressure, vehicle speed, air flow 
rate and intake manifold pressure. 

Содержание 3100j













































































































Отзывы:

Нет отзывов