Innova 3100j, Руководство пользователя, Страница: 59 / 108

Using the Diagnostic Tool
ERASING DIAGNOSTIC TROUBLE CODES (DTCs)
3100j 57
3. Press and release the ERASE
button. A confirmation message shows
on the LCD display.
„ If you are sure you want to proceed,
use the
UP and DOWN but-
tons, as necessary, to highlight YES ,
then press the ENTER button.
- If you do not want to continue
with the erase process, use the
UP and DOWN buttons,
as necessary, button to highlight
NO , then press the ENTER
button.
4. If you chose to erase DTCs, a “One
moment please…” message displays
while the erase function is in progress.
If the vehicle’s engine is running, an
advisory message shows on the
diagnostic tool’s display. Turn the
engine OFF, then turn the ignition
back to ON. DO NOT start the
engine. Press the
ENTER
button to continue.
„
If the erase was successful, a
confirmation message shows on the
display. Press the
SYSTEM MENU
button to return to the System
Menu.
If the erase was not successful
and ECU error code $22 is
present, an advisory message
displays. Start the engine and
maintain vehicle speed at 0, then
press the
ERASE button to
try again.
„ If the erase was not successful, an
advisory message shows on the
display indicating the erase request
was sent to the vehicle’s computer.
Press the
M button to return to the
Main Menu.
Erasing DTCs does not fix the problem(s) that caused the code(s)
to be set. If proper repairs to correct the problem that caused the
code(s) to be set are not made, the code(s) will appear again (and
the check engine light will illuminate) as soon as the vehicle is
driven long enough for its Monitors to complete their testing.