Innova 3100j, Руководство пользователя, Страница: 51 / 108

Using the Diagnostic Tool
VIEWING OEM ENHANCED DTCs
3100j 49
„ If the diagnostic tool cannot link to
the vehicle’s computer after three
attempts, the message “Contact
Technical Support” displays.
- Press the SYSTEM MENU
button to return to the System
Menu.
- Turn the ignition off, and
disconnect the diagnostic tool.
- Contact Technical Support for assistance.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 8 for a description of
LCD display elements.
„ A visible icon indicates that the diagnostic tool is being
powered through the vehicle’s DLC connector.
„
A visible icon indicates that the diagnostic tool is linked to
(communicating with) the vehicle’s computer.
„
The upper left corner of the display
shows the Diagnostic Trouble Code
(DTC), the number of the code
currently being displayed and the
total number of codes retrieved, and
the type of code.
„ The related code definition is shown in
the lower section of the LCD display.
If the definition for the cur-
rently displayed code is not
available, an advisory mes-
sage shows on the diagnos-
tic tool’s LCD display.
I/M MONITOR STATUS
icons are not displayed
when viewing enhanced
DTCs.
In the case of long code definitions, a small arrow is
shown in the upper/lower right-hand corner of the code
display area to indicate the presence of additional
information. Use the
UP and DOWN buttons,
as necessary, to view the additional information.
„ The diagnostic tool will display a code
only if codes are present in the
vehicle’s computer memory. If no
codes are present, a “No OEM
Enhanced DTCs are presently
stored in the vehicle’s computer.” is
displayed. Press the
button to
return to the System Menu.