Innova 3100j, Руководство пользователя, Страница: 39 / 108

Using the Diagnostic Tool
CODE RETRIEVAL PROCEDURE
3100j 37
„
A visible icon indicates that the diagnostic tool is linked to
(communicating with) the vehicle’s computer.
„ The I/M Monitor Status icons indicate the type and number of
Monitors the vehicle supports, and provides indications of the
current status of the vehicle’s Monitors. A
solid green Monitor
icon indicates the associated Monitor has run and completed its
testing. A blinking red Monitor icon indicates the associated
Monitor has not run and completed its testing.
„ The upper left corner of the display
shows the Diagnostic Trouble Code
(DTC), the number of the code
currently being displayed and the
total number of codes retrieved, and
the type of code.
„
The related code definition is shown
in the lower section of the LCD
display.
In the case of long code definitions, a small arrow is
shown in the upper/lower right-hand corner of the code
display area to indicate the presence of additional
information. Use the
UP and DOWN buttons,
as necessary, to view the additional information.
12. Read and interpret Diagnostic Trouble Codes/system condition
using the LCD display and the green, yellow and red LEDs.
The green, yellow and red LEDs are used (with the LCD
display) as visual aids to make it easier to determine
engine system conditions.
„ Green LED – Indicates that all
engine systems are “OK” and
operating normally. All monitors
supported by the vehicle have run
and performed their diagnostic
testing, and no trouble codes are
present. A zero will show on the
diagnostic tool’s LCD display, and
all Monitor icons will be solid.
„ Yellow LED – Indicates one of the
following conditions:
A. PENDING CODE IS PRE-
SENT – If the yellow LED is
illuminated, it may indicate a
Pending code is present. Check
the diagnostic tool’s LCD
display for confirmation. A
Pending code is confirmed by
the presence of a numeric code
and the word PENDING on the
diagnostic tool’s LCD display.