Innova 3100j, Руководство пользователя, Страница: 46 / 108

Using the Diagnostic Tool
VIEWING OEM ENHANCED DTCs
44 3100j
1. Use the UP and DOWN buttons,
as necessary, to highlight the desired
option, then press the
ENTER button.
„ If KOER is selected, an advisory
message shows on the diagnostic
tool’s display.
- Start and warm the engine to
normal operating temperature,
then press the
ENTER button.
Proceed to step 3 .
2. If KOEO or Continuous Memory is
selected, an “instructional” message
shows on the diagnostic tool’s display.
„
Turn the ignition OFF, then back
ON. Press the
ENTER button.
Proceed to step 3 .
3. A “One moment please” message
displays while the test is in progress.
„
If the diagnostic tool fails to link to the
vehicle’s computer, a “Communication
Error” message shows on the
diagnostic tool’s display.
- Ensure your vehicle is OBD2 com-
pliant. See VEHICLES COVERED
on page 5 for vehicle compliance
verification information.
- Verify the connection at the DLC, and verify the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then back ON to reset
the computer.
- Press the POWER/LINK button to continue.
„ If the diagnostic tool cannot link to
the vehicle’s computer after three
attempts, the message “Contact
Technical Support” displays.
- Press the SYSTEM MENU
button to return to the System
Menu.
- Turn the ignition off, and
disconnect the diagnostic tool.
- Contact Technical Support for assistance.