BASIC OPERATIONS
page17
By pressing the VIDEO button on the remote control and confirming by the OK button, you can
change the mode as follows:
SIGNAL INPUT SELECTION
POWER
VIDEO
TV INTER DVD VIDEO 1 VIDEO 2 VGA HDMI/DVI
1. Turn on the power of the AVC system after the power cable is connected .And the AVC system
is in standby state ;
2. Press POWER on the DISPLAY unit and the DISPLAY unit is in standby state and the
STANDBY indicator lights up red ;
3. Press POWER on the remote control, you can turn on the power of the system.
TURN ON THE POWER
1. During the playback of the system , press POWER on the remote control to turn off the power ,
the system is in standby state and the STANDBY indicator on the AVC system and the
DISPLAY unit lights up red ;
2. Press POWER on the AVC system to turn off the power of the AVC system ;
3. Press POWER to turn off the power of the DISPLAY unit, and the STANDBY indicator went out
gradually.
Note:
If you don’t use this system for a long time, make sure unplug the AC power connector plug.
TURN OFF THE POWER
T V / V I D E O / P C
ON/OFF
CH
CH
VOL
VOL
T V M E N U
POWER
TV/VIDEO/PC