INIM Electronics SmartLiving 10100L, Руководство пользователя

Страница: 23 / 48

User’s Manual
Using the system 23
Chapter 5
USING THE SYSTEM
This chapter describes all the operations users can carry out with or without
authorization (user PIN entry). The tools and methods which allow access the
system operations are as follows.
The system can be accessed:
•
Via keypad (JOY/GR, JOY/MAX, nCode/G, Concept/G).
The keypad allows users to operate the system:
1. By means of shortcuts (refer to paragraph 3-1 Keypad shortcuts )
2. By means of access codes via the User Menu (refer to paragraph 2-5 User
Codes and paragraph 3-2 Shortcut with code ) Users have various ways of
viewing their personal menus (refer to paragraph 2-5-1 Accessing the User
Menu ), however, this chapter describes the procedure via menu and pro-
vides the visual information relating to the sections described at point 1 in
paragraph
2-5-1 Accessing the User Menu .
• Via Reader (nBy/X, nBy/S, built-into JOY/MAX keypads)
This proximity-key reader provides users with only one way of accessing the
system, as described in paragraph
3-3 Key and Reader shortcuts .
• Over-the-phone
During a call from/to the control panel after valid code (PIN) entry.
• Via Command Zone
After violation of a duly-programmed zone which sends a command to the
control panel.
• Via Wireless keyfob
by means of keys , ..., as described in paragraph 2-6-1 Air2-KF100
Wireless keyfobs .
• Via Web
by means of the integrated web-server on the SmartLAN/G (if installed) via
any browser (refer to paragraph
5-17-2 Access the web-server ).
5-1
Managing alarms
This paragraph describes the actions users can take during typical alarm and
tamper conditions:
•
Stop alarms - deactivates instantly the outputs activated by zone/partition
alarm and tamper events and system tamper events.
The system tamper events are:
•• Open panel
•• Dislodged panel
•• Peripheral tamper (expansion, keypad, reader)
•• Peripheral loss (expansion, keypad, reader)
• Clear call queue - clears the outgoing call queue and stops any ongoing
calls.
• DeleteAlarm mem. - implements a “Stop alarms” operation and, at the same
time, deletes memory of system and partition alarm and tamper events.
Via Keypad
Method 1
Activate the shortcuts associated with keys , ..., (shown on the display)
with or without code entry.