User’s Manual
Using the system
25
Via Keypad
Method 1
Activate the shortcuts associated with keys
, ...,
(shown on the display)
with or without code entry.
•
The shortcut which is assigned to “Arm/Disarm” operations (shortcut n.1:
) applies the pre-set scenario.
•
The shortcut assigned to “Arm/Disarm Menu” (shortcut n.12:
), allows
you to view the respective section and arm (in Stay or Away mode) or disarm
each partition separately.
1. Select the desired partition, using keys
and
.
2. Select the required operating mode, using keys
and
.
3. Once the required operation has been selected, press .
Method 2
Access the "Arm/Disarm" section of the User menu by means of a valid PIN.
Follow the instructions described in
Method 1
.
Method 3
While the entry time is still running (refer to “Entry Time” in
Appendix A,
Technical terminology and Glossary
), type in a valid code followed by
(the
code must have access to the “Arm/Disarm” section of the User Menu), the
partitions the code and keypad concerned have in common will disarm instantly.
Via Reader
Hold a valid key in the vicinity of the reader and remove it when “Arm/Disarm”
(shortcut n.1) is indicated on the LEDs (the system will apply the pre-set
scenario).
Over-the-phone
Type in a valid code PIN followed by “
#
”. Press the number key (from “
0
” to “
9
”)
associated with the “Arm/Disarm” shortcut (shortcut n.1) in order to apply the pre-
set scenario.
Via Command Zone
Under normal circumstances, a command zone comprises a mechanical key-lock
or callpoint which activates an electrical contact wired to the command zone. In
accordance with how the command zone is configured, it is possible to:
•
arm the partitions the zone belongs to
•
disarm the partitions the zone belongs to
•
switch the status of the partitions (arm any disarmed partitions and disarm any armed
partitions, refer to “Switch Zone” in
Appendix A, Technical terminology and Glossary
)
•
arm the partitions the zone belongs to when the command zone is violated,
and disarm the partitions the zone belongs to when it restores to standby
Via Wireless keyfob
Push the respective button on the keyfob and verify the outcome of the requested
operation, as described in paragraph
2-6-1 Air2-KF100 Wireless keyfobs
.
Via Auto-arm operations
If a partition is associated with a timer which controls automatic-arming
operations, it will arm when the timer switches ON and disarm when the timer
switches OFF. Users who are enabled to control Auto-arm operations (refer to
paragraph
5-4 Activations
) must:
•
activate the timer associated with the Auto-arm operations
•
enable the Auto-arm option for the partitions concerned
Via Web
Access the SmartLAN/G web-server and press
button. Use the mouse to
select a partition then press the buttons shown opposite to activate the
operations.
Access the “Scenario activation” section, through the mobile-phone interface,
press
. Select the desired scenario from those available, by clicking-on the
scenario label or icon
. In response, the system shows the icons opposite:
18:23 30/10/2011
DDDDDDD
User Code
Manage alarms
Arm/Disarm op.
Voice functions
Arm/Disarm op.
PARTITION 001
Away
ADS-------
Type in code
******
Method 2
Armed in
Away mode
Method 1
Method 2
Method 2
Method 1
Icon
Key
Arm selected partition in Away
mode
Arm selected partition in Stay
mode
Arm selected partition in Instant
mode
Disarm selected partition
Icon
Scenario activated correctly
Scenario not activated
Содержание SmartLiving 10100L
Страница 45: ...User s Manual 45 Notes...
Страница 46: ...46 User s Manual...
Страница 47: ...User s Manual 47...
