INIM Electronics SmartLiving 10100L, Руководство пользователя

Страница: 16 / 48

16 The SmartLiving System
User’s Manual
2-5-1
Accessing the User Menu
In order to access a customized (personal) menu, it is necessary to type the
respective PIN and press key .
At this point, there are 3 different ways of allowing first-access to the user menu,
depending on the system setup, as follows.
1. The user can access the menu directly, as shown in the figure opposite
(1.) ; using keys and , the user can select the desired menu sec-
tion and press for access. Following is a the list of available User-Menu
sections:
• Manage alarms
• Arm/Disarm op.
• Voice functions
• Activations
• View
• Outputs ON/OFF
• Set date/time
• Set Keypad
• Change PIN
• TelephoneNumbers
• Teleservice req.
• Overtime
• Thermostat
2. The keypad cancels the shortcut icons associated with keys , ...,
and replaces them with the customized shortcut icons associated with the
code, as illustrated opposite
(2.) ; using keys , ..., and , ...,
select the desired shortcut.
3. You can access a descriptive menu of the customized shortcuts assigned to
keys , ..., as opposite (3.) . To activate the shortcuts use key
or to scroll for the description of the required shortcut then
press .
All methods allow first access to the menu after a valid code-entry followed by . At
this point, each time you press key , 3 different objects will appear, select the one
that applies to the operation concerned and then continue.
2-6
Keys
The SmartLiving system is capable of managing INIM's contact-free digital-keys,
which are available in three versions:
•
nKey - proximity keyfob
• nCard - proximity card
• Air2-KF100 - wireless keyfob
Each key is unique and is identified by a random code selected from over 4 billion
code combinations. During the installation phase, each key is enrolled on the
system in order to allow it to operate.
Each key is characterized by the following parameters (programmed by the
installer) in accordance with the requirements of the key user.
•
Partitions - User codes can control only the partitions they are assigned to. If
a key is used at a reader, it can operate only on the partitions the two devices
have in common. For example, if the key controls partitions 1, 3, and 5 and
the reader controls partitions 1, 2 and 6, the key can operate on partition 1
only, as it is the only partition the key and reader have in common. If a keyfob
button is pressed, the user will be allowed access only to the partitions the
wireless keyfob is assigned to.
• Up to 4 Shortcuts .
• A Timer can be set up to restrict the use of a key. The system will allow the
key to operate the system only when the Timer is active. In this way, the user
will be unable to access the system at all other times.
• Patrol attribute - This option is usually enabled on keys used by security
personnel or night watchmen who must patrol the protected premises at
regular intervals. This type of key does not allow the user to select the “Arm
Type”. When a key with this attribute is recognized, the system will perform
the following operations:
User Code
User Code
Manage alarms
Arm/Disarm op.
Voice functions
User Code
Stop alarms
Delete memory
View menu
(1.)
(2.)
(3.)