INIM Electronics SmartLiving 10100L, Руководство пользователя

Страница: 26 / 48

26 Using the system
User’s Manual
5-3
Voice functions and Intercom
(JOY/MAX only)
Voice communication (during keypad-to-keypad intercom calls) is one-way,
therefore, only one person should speak while the other listens. The user who
wishes to speak must press on the keypad in use.
The voice functions are:
•
Record - starts the recording phase of the memo in the memo-box of the
keypad you are working on.
• Playback - starts the playback phase of the memo in the memo-box of the
keypad you are working on.
• Delete - deletes the memo in the memo-box of the keypad you are working
on.
• Intercom - allows two-way voice communication with another JOY/MAX
keypad.
Via Keypad
Method 1
Activate the shortcuts associated with keys , ..., (shown on the display)
with or without code entry.
• The shortcut assigned to the “Voice functions menu” (shortcut n.14: )
allows you to view the “Voice functions” section. Select the required function
by means of keys e then press .
•• Record/Playback - the operation time-out (expressed in seconds) will be
signaled by a counter and a progress bar on the display. If you wish to
interrupt the record/playback operation manually, press , otherwise, it
will end automatically when the pre-set time-out expires. You can adjust
the volume during the playback phase using keys
and .
•• Delete - this operation must be confirmed by pressing .
•• IntercomCall - the display provides the list of keypads you can call.
Use and to select the keypad you wish to contact, then press
to send the call. The recipient keypad will emit a series of beeps to
signal an incoming call and the display will be as shown in the figure. The
recipient can press to answer the call or to reject it. Both the
sender and the recipient can end the call by pressing . The volume can
be adjusted during the listen phase by pressing keys
and
.
• The “IntercomCall" shortcut (shortcut n.11: ) allows you to view the
previously described “Intercom call" section.
Method 2
Access the "Voice functions" section of the User Menu by means of a valid PIN.
Follow the instructions described in Method 1 .
5-4
Activations
The activation/deactivation of the SmartLiving system peripherals and elements
(described in the following section) enables them to operate in accordance with
their settings (activation) or disables their functions completely (deactivation).
The user has full control over activation/deactivation of the SmartLiving system
peripherals and elements.
The following section describes the consequences of activation/deactivation.
•
Zone - disabled zones cannot generate alarms (inhibited).
• Auto-arm operations - can be activated/deactivated separately on each
single partition. If this option is enabled on a partition, it will arm and disarm
in accordance with the On/Off settings of the respective timer.
18:23 30/10/2011
DDDDDDD
User Code
Manage alarms
Arm/Disarm op.
Voice functions
Voice functions
Record
Play
Delete
Type in code
******
Method 2
Method 2
Method 2
Record
0034 sec.
Intercom
KEYP. 002
KEYP. 003
KEYP. 004
Ongoing call
KEYP. 001
OK = ANSWER
Esc = END
Caller keypad “KEYP.001” 1
Recipient keypad “KEYP.002” 1
Method 1