Installation and programming manual
44
Settings
8.10
Programming periodic events
Figure 18 - Programmable events table
You can program recurring events and pre-set events. The
Events
list
provides two programmable events: a periodic event
(e.g. send an 'All's well'
Contact ID report)
and an expiration event.
Programming of this window is independent of all the other programming
pages in the software application and takes place when the
Initialise
button
is selected.
Note:
The examples are only suggestions. The programmable
events are fully customizable.
Parameter
Description
Note
Periodic event
The first
Periodic event
will be
generated in accordance with the
set date and time. Successive
periodic events will be generated
in accordance with the number of
hours set for the interval
between events.
For example, to send an
'All's well' Contact ID
report to the Alarm
Receiving Centre..
SmartLink-P must be
connected to a
computer in order to
implement this
operation.
Maintenance
event
SmartLink-P will trigger the
Maintenance event
in
accordance with the set date and
time.
For example, to send a
'Maintenance' reminder
voice message to the
installer.