Installation and programming manual
40
Settings
8.9.3
Send an event-triggered Contact ID report
Figure 15 - Events table - Contact ID
Each event can trigger and send a Contact ID report to a specific phone
number.
For example, an input zone alarm event to the Alarm Receiving Centre..
Note:
The code which allows the Alarm Receiving Centre to
recognize the system must be entered in the Codes list (refer
to paragraph 8.5.3 Setting up Caller ID codes).
Parameter
Description
Note
Contact ID
dialer
Folder containing Contact ID report
parameters. Double click to open:
columns containing the successive
parameters will appear. Double click
to close.
=no parameter has
been set
=some parameters
have been set.
Protocol
class
ContactID protocol class The event
protocol class must be approved by
the central station.
Event code
2 digit hexadecimal code
The Code must be
approved by the central
station.
Qualifier
New
for a new event,
Restored
for a cleared event. In report coding
New
=1 and
Restore
=3.
Phone
numbers
Check boxes corresponding to the
phone numbers for outgoing calls
set up in the
Phonebook
. The
phone number description appears
when you mouse over the respective
number on the tooltip bar.
See the
Call all Contact
ID numbers
option to
choose whether the
message must reach only
one of the dialed phone
numbers or all of them
successfully.