Installation and programming manual
Settings
25
8.3.6
1.
Create the header which will be shown on the printouts
(e.g. logo,
company name, etc.)
.
2.
To type in the respective data, select
Printer settings
, from
Settings,
Application settings
.
3.
Select the
icon and click on the file you wish to print.
8.4
Recommended programming flow
The flexibility-optimized SmartLink-P software offers many ways of preparing
the parameters, depending on the type of application.
Generally, you can proceed as follows.
1.
Prepare the data:
• phone numbers for Contact ID reports and voice messages
• voice messages
• Caller ID codes
2.
Configure the device parameters
3.
Configure the inputs and outputs (for intrusion control and normal
applications).
4.
Associate the incoming/outgoing calls with specific actions.
5.
Program the events which will:
• Send Contact ID reports
• Send voice messages
• Activate/Deactivate the outputs
• Generate constraint
6.
Program periodic events
8.5
Set up referencing data
8.5.1
Set up the contact numbers
Figure 7 - Phonebook
The SmartLink-P uses the 10 numbers in the phonebook for the outgoing
voice-message calls and Contact ID reports.
Note:
International numbers must be entered in the following
format: +xxyyyyyyyyy (e.g. “+390611111”).