Installation and programming manual
22
Settings
7.
Once installation has been completed, the SmartLeague icon will appear
on your desktop (if requested by the user) and in the program
list:
8.2.2
Check for the availability of a new version
of the SmartLeague software.
8.
Connect with us at www.inim.biz to find out about SmartLeague software
upgrades.
9.
View the differences between the new version and the installed version.
10. Work carefully through the upgrade instructions.
8.2.3
Check for the availability of a new version
of the firmware.
11. Connect with us at www.inim.biz to find out about SmartLink-P firmware
upgrades.
12. Work carefully through the download and installation instructions. All
upgrades come with the revised version of the manual.
8.3
SmartLeague software
SmartLeague is the programming software for INIM systems. The program is
designed to run on your service computer and will allow you to program most
of the SmartLink-P parameters without actually being connected to the
device.
Your service computer must be connected to the mounted powered-up
SmartLink-P during the parameter downloading phase.
The connection cable must be long enough to reach the mounted device
without difficulty. See paragraph
7.2.8 Connecting the RS232 PC serial link
.
The parameter settings can be saved to the SmartLeague database and used
for service purposes or as a 'standard configuration' for other SmartLink-P
devices.
During service sessions, you will be able to view and change the SmartLink-P
parameter settings.
8.3.1
General information
SmartLeague is the programming software of the entire INIM electronics
product spectrum. You can configure numerous devices/systems on your
office service computer, regardless of the type of device/system.
You can configure the programming parameters on your office service
computer and download them at leisure to the SmartLink-P.
You can work on several parameter groups ('
solutions'
) at the same time, for
example, you can copy a device/system configuration and download it to
another device/system of the same type. Each solution has its own
configuration file: