Ingersoll-Rand G 270, Руководство пользователя и инструкция по обслуживанию

Страница: 96 / 214

36
Engines with ignition switch
1. Turn the ignition switch to operating posi-
tion / ignition. In Volvo Penta ignition
switch position 1 (15+)
2. The solenoid valve is now activated for op-
eration (not stop position)
3. Vent the fuel system according to the stand-
ard procedures (see the previous page).
4. The engine is now operational
Venting engines with fuel shut-off valve connected
to supply voltage during operation:
Is there “automatic stop in the event of too low oil
pressure” with a Volvo Penta oil pressure switch?
When the engine is off, this switch is closed (“Nc”-
Normally closed).
Disconnect the connector at the oil pressure
switch.
SB= black
BL-W= blue-white
Is there “automatic stop in the event of too low
oil pressure” with a non-Volvo Penta oil pres-
sure switch that is open when the engine is off.
(“No” = Normally open)
Is the engine equipped with a Volvo Penta in-
strument box? Short-circuit the connector for
the oil pressure switch with a
loop.
Yes No
Yes No
Yes No
Engines with a Volvo Penta instrument
box
1. If there is a coolant level alarm – check the
level. If the level is too low, the level alarm
stops the engine.
2. Briefly press the “Starter button”. The instru-
mentation is now activated and the charge
lamp lights. If there is a coolant level
alarm: Hold in the “Interlock button” for ap-
proximately 4 seconds.
3. Vent the fuel system according to the in-
structions on the previous page.
4. Press the “Stop button”
5. Reconnect the connector
6. The engine is now operational
Maintenance