Infranor XtracontrolEC22 Скачать руководство пользователя | Manualshive

Страница: 12 / 64

background image

User Manual V1.1a | XtracontrolEC22

3.2

Scope of delivery and accessories

Scope of delivery

XtracontrolEC22

Accessories

Connector set XtracontrolEC22

3.3

Product features

Assembly

The device is designed for installation on a DIN rail (35 mm) in a control cabinet in an industrial environment with a
category 2 pollution environment.

Ethernet

The device has two 10/100 Mbit/s Ethernet interfaces. TCP/IP and UDP/IP protocols permit flexible connections to
visualisation software, higher-level control units and to the IT infrastructure.
One Ethernet interface can be equipped with an optional 3-switch (3 ports for the user) connected directly to the
CPU.
The second Ethernet interface is connected to the controller via a PCIe.
Additional protocols are available: PROFINET, BACnet, Ethernet IP and Modbus.

USB

Thanks to the USB host interface, a wide range of peripherals can be connected to the device. Examples are a USB
stick for updating the application or for downloading data directly.

CAN interfaces (except XtracontrolEC22.51)

The device has one standard CAN interface which can be used at a speed of up to 1 Mbit/s.

Serial interfaces

The XtracontrolEC22 has up to three potential-free serial interfaces (2x RS485; 1x RS232).

Additional interfaces

There is also a debugging interface located on the XtracontrolEC22 which can be used in conjunction with a special
cable to be connected to the jack plug (for additional information, please contact our customer services team).

Real-time clock

A buffered, maintenance-free real-time clock can be set to the current time via a software interface.

microSD card (optional)

The XtracontrolEC22 has an optional microSD card slot, e.g. for downloading data. µSD cards of up to 32 GB are
supported.

Visualisation

CODESYS target visualisation is included in the scope of delivery. The Ethernet terminals XtracontrolET2 provide a
simple, user-friendly display.
The assembly also supports web visualisation.

Summary of features



CPU Cortex TM-A9 single core (scalable to 800 MHz)



user program and data memory (RAM): 256 MB onboard
XtracontrolEC22.60: 1024 MB onboard

12

©

Infranor GmbH

«
...
10
11
12
13
14
...
»

Содержание XtracontrolEC22

































































Отзывы:

Нет отзывов

Похожие инструкции для XtracontrolEC22

ACS850-04 series

Бренд: ABB Страницы: 296

Бренд: ABB Страницы: 320

Бренд: ABB Страницы: 50

Бренд: ABB Страницы: 56

Бренд: Bartlett Страницы: 30

Бренд: Dakota Digital Страницы: 6

CMD-2000 Series

Бренд: Dakota Digital Страницы: 10

Бренд: Z-Wave Страницы: 6

Бренд: Hach Страницы: 36

Бренд: Hach Страницы: 72

Бренд: Sanhua Страницы: 3

Бренд: Mamas & Papas Страницы: 44

Бренд: Mamas & Papas Страницы: 8

Бренд: Omegalink Страницы: 2

Бренд: MamaLove Страницы: 9

Бренд: Parker Страницы: 4

Бренд: Securi-Prod Страницы: 3

Бренд: S&C Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды