78
79
WARning light indicator
The WARning light indicator shows status of projector protection function. Check warning and
pOWeR light indicator for good maintenance operation.
note:
Unplug the AC power cord in case of any abnormality as it may lead to fire or electric
shock.
The projector turns off and the WARning
indicator flashes red.
The power is abnormal and the pOWeR indicator turns steady yellow.
Your projector powers off automatically to protect components within it when it is overheated. The
POWER indicator flashes when your projector is cooling down. Press the
pOWeR
button to power
your projector on again when it is cooled down to normal operation temperature.
Check the following:
– is adequate clearance provided for your projector’s ventilation? Check the installation status
and any air outlet block.
– is your projector installed at location close to outlet of air conditioning equipment? Keep your
projector away from air outlet of air conditioning equipment.
– Is the filter in clean condition? Please clean the filter regularly.
The pOWeR indicator turns steady yellow and your projector powers off to protect its internal
components whenever an abnormality is detected. unplug the AC power cord and connect again.
Restart your projector and run checkup routine. if the problem persists, unplug the AC power cord
and call your service center for checkup and maintenance.
The WARning indicator
flashing red
The pOWeR indicator
turns steady yellow
note:
The POWER indicator stops flashing when your
projector’s internal temperature cooled down to
normal and it is powered on again.
maintenance and cleaning
mac OS operating environment
When using mac OS
1) Remove the uSB cable directly,when
terminate uSB display.
The termination of uSB display
nOTe
●
Resolution of the computer screen will be switched.
●
You need wait for a moment,if you want
project computer screen.
●
Connect the uSB cable directly to the computer's uSB connector. When connecting the
uSB hub, it may be abnormal.
Operating System
mac os x 10.5,10.6,10.7
Cpu
power pC g4 1ghz or faster compatible processors
memory Capacity 512mB or above
Disk Space Available 20mB or above
monitor
Resolution 640x480 or above, 1600x1200 or above
CAn nOT guarantee that the pC meeting the above conditions can operate normally .
1) using uSB-B cable to connect the projector to the uSB display terminals.
●
items in grey are not available.
2) press the information source menu on the remote controlor the inpuT button on the control
panel, then select [uSB monitor] in the input source menu.
3) Double-click "monitor.app" button installed on the virtual disk.
●
projecte
image on the computer screen.
4) press the driver icon in the computer drive in the computer's task bar
,the select one item
in the pop-up menu bar.
●
pop-up menu only display in Chinese.
project uSB display
[Active audio] /[Disable audio]
Sets up the output from the computer's audio
.
[play video] / [pause video]
Switch on playing and pausing images
.
[Start / Stop]
Sets up the output from the computer's image
.
[exit]
Terminate uSB monitor
useful function
