INFOTO PCL-LT112W, Руководство пользователя

Страница: 19 / 50

36 37
Display
1) press button to select [ Aspect ] menu.
2) press <OK> button.
3) press
button to select [ Advanced ] menu.
4) press <OK> button.
5) press
button to select the required item.
(Only for pC signal input)
On the premise that the relative position of both pro-
jector and the screen is set up right,you can move the
image vertical position,if the position of the projected
image on the screen is deviated.
1) press
button to select [V position] menu.
2) press <OK> button.
3) press
button to adjust image V position.
Adjustment range is from -5 to +5.
V position
(Only for pC signal input)
You can adjust and reduce the interference caused
by patterns of the projected vertical stripes.The
following projected patterns may cause a circular
pattern (noise). Adjust the amount of interference
to the minimum. users can point the clock to adjust
images.
1) press
button to select [h size] menu.
2) press <OK> button.
3) press
button to adjust h size level .
Adjustment range is from -15 to +15.
h size
A djust the image to fit the screen size,while keeping
aspect of input signal's unchanged.
press < menu > button on the remote controller or
on the top control panel to display the OSD menu.
press  button to select the Display menu ,then
press <OK> or  button
.
1) press button to select [ Aspect ] menu.
2) press <OK> button.
3) press button to select the required item.
normal....use the maximum size to roject while
keeping the aspect of input signal's
unchanged.
Wide........project images at the aspect of 16: 9.
Full...........project images to the maximum.
● Only for pC (VgA1) signal input .
Advanced ...... Splicing screen.
●
Only for pC (VgA1) signal input .
Aspect
Aspect menu
Display
h Total.........Set the h total ,and images will be
vertical division by the set value.
Adjustment range is from1 to 5 of
widescreen .
V Total..........Set the V total ,and images will be
horizontal division by the set value.
Adjustment range is from1 to 5 of
widescreen .
h position....Set the projector in horizontal
position.
Adjustment range is from1 to the
current h Total value .
V position....Set the projector in horizontal
position.
Adjustment range is from1 to the
current V Total value .
Select this function to set the progect way .
please change the projection way,if the OSD
displays inversely or reversedly.
press < menu > button on the remote controller or
on the top control panel to display the OSD menu.
press  button to select the Display menu ,then
press <OK> or

button
.
1) press button to select [project way] menu.
2) press <OK> button.
3) press button to switch .
Front : when the projector is installed on the table
and projected in front of the screen.
Rear : when the projector is installed on the table
and projected in rear of the screen (using translu-
cent screen)
Ceiling / Front : when use the bracket to lift the pro-
jector (optional) in front of the screen.
Ceiling / Rear : when use the bracket to lift the pro-
jector (optional) in rear of the screen(using translu-
cent screen).
Auto ceiling / Front : when the projector is projected
in front of the screen.
Auto ceiling / Rear : when the projector is projected
in rear of the screen.
project way
project way menu
note:
● Only the VgA 2 port can be set
to monitor out .
● image segmentation function
work only when you choose
VgA 1 as input signal and VgA
2 as output one.