50
51
press the AuTO button on your remote controller to exe-
cute the following functions : input search, Auto pC adj
.
,
and Auto keystone.
1) press
button to select [Auto setup] menu.
2) press <OK> button.
3) press
button to select required items.
input search : Select this function to detect the signal,
then project images and input signals
automatically .
Auto pC adj
.
: Select this function to adjust [Fine sync],
[h position], [V position] and [h Size]
automatically, when projector input
analog signals.
Auto keystone:Select this function to correct vertical
distortion of the projected image
automatically.
Auto setup
expand
Auto setup
Keystone
Select this function to store or reset the Keystone or
some related setting after unpluging the AC power.
press < menu > button on the remote controller or on
the top control panel to display the OSD menu.press
button to select the expand menu ,then press
<OK> or
button to enter
1) press
button to select [Keystone] menu.
2) press <OK> button.
3) press
button to select required item.
4) press <OK> button.
Keystone
expand
Keystone
Select this function to store and reset Keystone after
closing the projector or unpluging the AC power .
●
This function is only when the option about Auto
keystone is not set On.
Store......Store Keystone after closing the projector or
unpluging the AC power .
Reset value......Keystone function will be cancelled
after closing the projector or unpluging
the AC power when the Standby mode
is set to eCO. mode .
When the Standby mode is set to
normal, Keystone will be cancelled if
you unpluge the AC power ; while it will
be stored when closing the projector .
h/V Keystone
Select this function to correct the projected images hori-
zontally or vertically
Conner correction
Select this function to correct the projected images of
four corners distorted.
press
button to keystone at four corners of
the screen. The four corners are looped in sequence
shown below:
Keystone sub-menu
press
button to
reduce upper width
press
button to
reduce left width
press
button to
reduce bottom width
press
button to
reduce right width
Conner correction
upper left
upper right
Bottom left
Bottom right
note:
●
White arrow indicates no correction.
●
Red arrow indicates Keystone direction .
●
The arrow disappears when the correction come to the maximum.
note:
●
One of input search, Auto pC Adj. and Auto
keystone option should be set to On at least .
●
plesse adjust the projector manually ,if the image
is displayed abnormal even if you have select
Auto keystone function.
●
When you set project way as Ceiling / Front or
Ceiling / Rear , Auto keystone function is invaild.
●
When you set project way as Auto
ceiling /
front or Auto ceiling / rear , and users put their
projector in ceiling state, the Auto keystone
function will be invaild.
