INFOTO PCL-LT112W, Руководство пользователя

Страница: 30 / 50

58 59
expand memory Viewer
Set slide
Select this function to play slides.
1) press  button to select a file.
2) press button to select [Set slide] menu.
3) press <OK or > button.
● Full screen display
● press <OK> to return the thumbnail.
Slide transition effect
Select this function to set the slide's playback ,when
switching slides.
1) press
button to select [Slide Transition
effect] menu.
2) press <OK or > button.
3) press button to switch required item.
Slide down.....Switch slides from the upper to the
lower .
Slide right......Switch slides from left to the right.
Select memory Viewer function can project images
stored in uSB memory
,
when you insert the uSB
memory into the projector.
press < menu > button on the remote controller to
display the OSD menu.press

button to select the
memory Viewer menu ,then press <OK> or

button
.
1) press button to select reqiured item.
2) press <OK> button.
3) press
button to set options.
4) press <OK> button.
memory Viewer menu
Sort order
Select this function to set the slide's order.
1) press
button to select [Sort order] menu.
2) press < OK > button.
3) press button to switch required item.
expand order......S ort by expand names of file or
folder.
Size order.....S
ort by size of file or folder.
Time order..............S ort by the time of file or folder.
name order............ S ort by names of file or folder.
Operation steps
1 power on your projector.
2 Acquire the ip address, with DhCp set to on and
auto ip allocation set to On. (You may set DhCp
to Off and set up ip address manually if you are
somehow familiar with networking.)
3 enter the network setup menu
(1) press menu button on remote controller or
top of the control panel, press button to
select network icon.
(2) press button select network settings and
press OK button to enter.
mAC address......Display the mAC address
of wired network.
ip address...........Display the ip address of
wired network.
(3) press button to set DhCp On to obtain
an ip address, subnet , gateway and DnS
automatically , and press OK button to
confirm.
press button to set DhCp Off,then
press OK button to enter an ip address,
then press  button to select subnet ,
gateway and DnS automatically.And press
OK button to confirm.
network menu
Function: This function is designed to allow the computer control the projector remotely via
intranet.
preparation
1 Required equipment: projector, computer, network cable
2 Connection:
Connect your projector to a router or switch in the LAn with normal or jumper network
cable. in case a normal network cable failed to connect successfully, use a jumper cable
instead.
3 Turn on the computer. The LAN port on computer and projector are flashing after power
on the projector.
network
note:
● When selecting [memory Viewer]
as input signal, the "memory
Viewer" menu is available.
● in addition to "Set slide" menu
，
even change the settings, if you
do not implement the [Applica-
tion], the setting value of the
change is invalid.