68
69
network control
[general Setup] page
①
enter old password: e
nter the password for the configuration.
②
enter new password: enter a new password.
③
Confirm new password:
R
e-enter the new password to confirm.
④
power & Source: update settings.
⑤
power: Switch on the power of the projector on / off.
⑥
Source select: Switch the input source of the projector.
[picture Setup] page
①
Brightness: Adjust the brightness of the projected image.
②
Contrast: Adjust the contrast of the projected image.
③
Sharpness: Adjust the sharpness of the projected image.
④
Saturation:Adjusts color saturation of the projected image.
⑤
Tint: Adjusts the tint of the projected image.
⑥
Color Temperature: Adjust the color temperature of the projected image.
①
Versions: Displays the firmware version of the projector.
②
LAn Status: Displays the LAn. connection status
.
[System Status] page
[image Setup] page
①
Aspect ratio: Switch the aspect ratio of the projected image.
②
phase: Adjust the phase of the projected image.
③
horizontal position: Adjust the horizontal position of the projected image.
④
Vertical position: Adjust the vertical position of the projected image.
⑤
horizontal Dimension: Adjust the horizontal dimension of the projected image.
⑥
Screen Freeze: Select the function to switch the screen freeze on and off.
⑦
Automatic computer adjustment: implement the automatic computer adjustment function.
⑧
Vertical trapezoidal correction: Correct trapezoidal distortion in vertical direction.
⑨
horizontal trapezoidal correction: Correc horizontal distortion in horizontal direction.
⑩
Surface correction:Correct pincushion and barrel of the projected image.
⑪
Angle: Correct four angles of the projected imagehe .
network control
