InfoPrint 6500-v05, Руководство пользователя

Страница: 178 / 340

Width Limit:
v
Disable (the default). This does not limit the width of expanded characters.
v
Enable . When enabled, limits the width of expanded characters based on a fixed
maximum ratio of width over height.
Absorb at ^PN:
v Disable (the default). When disabled, system terminators following the (cc)PN
command are sent to the printer and result in paper motion.
v
Enable . Prevents paper motion following the (cc)PN command.
IGP110 Compatibility:
v
Enable (the default). This menu will process ^IPEXP commands in the same
manner the IGP does, and does not expand special font characters if an ^IPEXP
command precedes it.
v
Disable . If disabled, it will allow the special font characters to be expanded.
Inline Graphics:
v
Disable (the default). Requires the printer move to the beginning of the line to
start a graphic.
v Enable . Permits Code V graphics to start in the middle of a print line as
opposed to moving to the beginning of the line to start a graphic.
LF For Term:
v Disable
(the default). The LF command ( ^, ) used to terminate a graphic
command sequence will not be performed as LF.
v
Enable . The LF command ( ^, ) used to terminate a graphic command sequence
will be performed as LF.
Ignore ^Lxx Cmd.:
v
Disable (the default). Checks command syntax and prints error messages when
command parameters are incorrect.
v
Enable . Suppresses error checking and error messages.
Error Handling
Error Messages:
v
Enable (the default). Checks command syntax and prints error messages when
command parameters are incorrect.
v
Disable . Suppresses error checking and error messages.
162
InfoPrint 6500-V User’s Manual