InfoPrint 6500-v05, Руководство пользователя

Страница: 177 / 340

UPC Descenders: This parameter determines if a gap is left for human readable
data in UPC/EAN bar codes, even if there is no human readable data. There will
be no change if there is human readable data.
v
Enable (the default). Leaves a gap even if there is no human readable data.
v
Disable . Does not leave a gap if there is no human readable data.
Rotate Character Size: The Rotated Character Size option determines if rotated
(clockwise/counterclockwise), expanded characters have a different size than a
non-rotated character with the same size parameters (Adjusted) or the same size
(Not Adjusted).
v Adjusted
(the default).
v
Not Adjusted
Ignore Spaces:
v
Disable (the default). Trailing spaces are NOT deleted from alphanumeric
elements in a graphics pass.
v
Enable . Trailing spaces are deleted from alphanumeric elements in a graphics
pass.
Midline PY:
v
Enable (the default). Allows printable characters to precede the ^PY command.
v Disable . Requires the ^PY command to be the first characters on a line.
Dark Barcode:
v
Disable (the default). Bar codes are printed in normal mode.
v
Enable . When enabled, prints all bar codes in a dark mode.
Expanded Font:
v
Block (the default). These are block characters compatible with the IGP-X00
printers.
v
Scalable . These expanded characters have rounded edges.
LP+ Font:
v
Disable (the default). The IGP/VGL uses its default half-dot font, which is
slightly different from the standard bitmap font used by LP+ at 12, 13, 15 and 17
cpi.
v
Enable . The IGP/VGL uses the same font as used by LP+ at all cpi.
Chapter 4. The Configuration Menus
161