InfoPrint 5504-R40, Руководство пользователя

Страница: 100 / 402

100
Chapter 3
QUICK SETUP
Gap/Mark Sensor
The available options specify the sensor type needed for detecting the Top-of-
Form position on media with label length indicators (gaps, notches, holes, or
black marks).
•
Disable . Select when using media with no label length indicators (no
gaps, notches, holes, or black marks), or when you want the printer to
ignore all existing label length indicators on the installed media.
NOTE: When you select Disable, the length of each label is based on the
Label Length value entered in the QUICK SETUP or MEDIA
CONTROL menu or the value sent via host software.
•
Mark . Select when using media that has horizontal black marks located
on the underside of the label liner or tag stock. The Top-of-Form position
is the leading edge of the black mark.
•
Gap . An alternative to Advanced Gap. The Top-of-Form position is the
leading edge of the die cut label (trailing edge of the gap, notch, or hole).
•
Advanced Gap . Select when using media with a liner space between die-
cut labels or when using tag stock with notches or holes as label length
indicators on white background media or when using media that has liner
gaps between die cut labels with black background. The Top-of-Form
position is the leading edge of the die cut label (trailing edge of the gap,
notch, or hole).
•
Advanced Notch . Select when using media with notches or holes that
interrupt a black vertical line on the underside of the media. The Top-of-
Form position is the leading edge of the die cut label (trailing edge of the
gap, notch, or hole).
The factory default is Advanced Gap.
FEED
T
he top edge
of
the
im
age
is
pa
ra
llel t
o
the
r
ight
ed
ge of
the med
ia.
Leading Edge
4 inches
6 inches