Copyright ©2018, Infoblox, Inc.All right reserved.
The
describes DB-9 and RJ-45 connector pin assignments. The DB-9 pin assignments follow the EIA232 standard. To make a serial
figure below
connection from your management system to the console port, you can use an RJ-45 rollover cable and two female RJ-45-to-female DB-9
adapters, or a female DB-9-to-female DB-9 null modem cable. The RJ-45 pin assignments follow IEEE 802.3 specifications. All Infoblox Ethernet
ports are auto-sensing and automatically adjust to standard straight-through and cross-over Ethernet cables.
DB-9
Console Port and RJ-45 Port Pinouts
DB-9 Connector Pin Assignments
Pin
Signal
Direction
1
(not used)
2
Receive
Input
3
Transmit
Output
4
DTE Ready
Output
5
Ground
—
6
DCE Ready
Input
7
RTS (Request to Send)
Output
8
CTS (Clear to Send)
Input
9
(not used)
RJ-45 Connector Pin Assignments
Pin
10Base-T
100Base-T Signal
1000Base-T Signal
T568A
Straight-Through Wire Colo
r
T568B
Straight-Through Wire Colo
r
1
Tr
BI_DA+
White/Green
White/Orange
2
Transmit -
BI_DA-
Green
Orange
3
R
BI_DB+
White/Orange
White/Green
4
(not used)
BI_DC+
Blue
Blue
